A Guide to Using Ceramic Coating on Plastic Surfaces

A Guide to Using Ceramic Coating on Plastic Surfaces

A DIY Guide to Cleaning Headlights Reading A Guide to Using Ceramic Coating on Plastic Surfaces 11 minutes Next Does Ceramic Coating Fill Swirls and Scratches on Cars?

May it be a discussion about ceramic coating powder coated wheels, or mulling over the mistakes people make while detailing their cars, some of the best blog topics come from our customers.

A few weeks back, one of our long-time customers posted a comment, asking whether or not Armor Shield IX could be used on plastic surfaces, specifically, after cleaning LED headlights.

The act of applying a nano ceramic coating on plastic surfaces still harbors a fair deal of confusion, especially when it comes to transparent components, like headlamps and tail lenses.

But as you shall soon see, car lights aren’t the only pieces of plastic that will benefit from a little detailing and nano ceramic coating magic. As long as it isn’t a foamy or super supple kind of plastic, chances are you can protect it with a nano ceramic coating. This includes motorcycle components, interior trim, and engine bay parts!

In the following guide, we’ll discuss the kinds of plastic surfaces that benefit the most from nano ceramic coatings, and the products you will need to complete the restoration process. We’ll also cover a few of our favorite plastic prep tricks, some choice Armor Shield IX application techniques, and a few “Quick Nerd Notes” for all you trivia buffs out there.

So enough with the introductory stuff. Let’s get that plastic looking fantastic!

 

Can Ceramic Coatings Be Used On All Types of Plastic?

Automotive manufacturers rely upon a wide variety of plastics to construct modern automobiles. Some of these plastics respond extremely well to nano ceramic coatings, while others tend to reject their silica-based protective properties.
Automotive manufacturers rely upon a wide variety of plastics to construct modern automobiles. Some of these plastics respond extremely well to nano ceramic coatings, while others tend to reject their silica-based protective properties.

Nano ceramic coatings coat and cure atop hard plastics the same way they do when applied to metal, carbon fiber, and glass. A high quality nano ceramic coating can be used on pretty much any plastic surface just as long as it is not prone to flexing and bending.

Although there are certain kinds of plastic that benefit more from a nano ceramic coating’s properties than others, the way in which the two man-made products interact with one another tends to be the same across the board.

Regardless as to what sort of plastic or polymer you may be coating, all of those microscopic nano particles of SiO2 (quartz) and specially engineered hardeners packed within each bottle of Armor Shield IX will penetrate any peak, valley, pocket, or pore they come across.

Once this nano technology is allowed to seep into and solidify atop a plastic surface, all of those imperfections and pockets become part of a super hard, ultra thin crystallized shell of protection.

Being that a nano ceramic coating is also completely transparent, it is 100% safe to use on headlights and taillight lenses, as well as clear coated and both painted or unpainted hard plastics.

So say goodbye to hazy yellow headlights and faded black plastic trim, because once these parts have been ceramic coated, things like UV ray damage and road pollution will no longer be of a concern.

When Should a Nano Ceramic Coating Be Used On Plastic?

When Should Ceramic Coating Be Used on Plastic?

One of the more common myths about nano ceramic coatings, is that they hide and repair damaged and unsightly surface blemishes. This is completely FALSE.

Despite being quite the modern luminary marvel, plastic headlights in particular are prone to absorbing all manner of airborne filth. Exposure to natural elements like pollen and tree sap, as well as all of the man-made crap that gets kicked-up along the highway results in headlamps turning from pristine pieces of plastic, into hazy eyesores.

So while a nano ceramic coating may protect whatever hard surface is beneath it, it also magnifies what it coats. So if you have hazy headlamps, don’t expect Armor Shield IX to magically transform them into crystal clear sources of illumination. It’s only going to make those nasty-looking lenses look all the more unattractive.

This is why we suggest either applying Armor Shield IX on brand-new plastic, or after it has just been restored, a topic that we will discuss in detail momentarily.

Quick Nerd Note: There are certain products that are marketed as a “plastic and rubber specific ceramic coatings.” The issue with many of these products is that their silica (SiO2) percentages tend to be a bit on the low side, which means they do not last very long and will not offer a lot of protection.

3 Reasons Why You’ll Want to Ceramic Coat Your Car’s Plastics

From headlights and shrouding, to bumpers, lips, and spoilers, plastics become both infinitely glossier and resistant to scratches and contaminants when protected by a nano ceramic coating.
From headlights and shrouding, to bumpers, lips, and spoilers, plastics become both infinitely glossier and resistant to scratches and contaminants when protected by a nano ceramic coating.

Those who are familiar with nano ceramic coatings typically assume that their primary occupation is protection, and for the most part, that’s completely accurate. Hydrophobic properties make things like bird crap, tree sap, road grime, and other contaminants bounce off a ceramic coated plastic, all while preventing things like UV rays from weakening its structure.

However, there are some other benefits that come with applying a coating to plastic surfaces.

Enhanced Vibrancy

A high-quality nano ceramic coating will both magnify whatever is beneath it, and add a sumptuous slathering of vibrancy to the equation. On a painted plastic surface, this results in deeper colors and a more vibrant shine, while unpainted plastics develop a darker depth that makes them appear wet, without being super shiny.

Say Goodbye to Bug Splatter

One of the biggest problems with the plastic parts on the front front-end of modern automobiles, is that bugs like to end their miserable little lives on them in dramatic kamikaze fashion.

Bug guts and the exoskeletons that surround them are a proverbial pain in the to remove ass too.

This is due in part to the fact that insects are loaded with come packed with abrasive acids, which if allowed to harden, can permanently affix themselves to paint, glass, metal, and… you guessed it, plastic.

A ceramic coated plastic front end makes bug removal a snap, with the majority of cases requiring little more than a quick spraying with a garden hose, followed by a plush microfiber towel wipe-down.

No More Fading

When it comes to blocking UV rays and the damages associated with direct sunlight, nano ceramic coatings are the alpha male in the paint protection product pack.

We won’t overload you with nerdy details, just know that a nano ceramic coating is one oxidation repelling badass, and therefore the king f fighting plastic paint fade. for more on the detrimental side of paint and plastic fade, be sure to check-out our article on clear coat surface oxidation and the damaging effects of UV radiation.

How Long Does Ceramic Coating Last On Plastic?

When it comes to determining the lifespan of a ceramic coated plastic component, it depends more upon proper installation procedures and routine maintenance than anything else.
When it comes to determining the lifespan of a ceramic coated plastic component, it depends more upon proper installation procedures and routine maintenance than anything else.

If properly applied and routinely maintained with a high-quality ceramic coating-friendly car shampoo, a layer of Armor Shield IX will last just as long on a plastic surface as it will on any other material.

In fact, there is zero difference in a ceramic coating’s application, aftercare, or protection levels when it has been applied to plastic surfaces. The only dissimilarity may be in how long it takes for the ceramic coating to “flash” during application, and how quickly it cures thereafter.

Quick Nerd Note: Despite being super resilient, Armor Shield IX nano ceramic coating will not provide your car’s plastics with a lifetime of protection. However, it will repel many of Mother Nature’s dirtiest and stickiest substances, as well as the man-made gunk commonly encountered on the open road for at least 2–years. AvalonKing backs every bottle of Armor Shield IX with a 2–year performance guarantee, including when its been applied to plastics.

How to Apply Ceramic Coatings to Plastic

Luke Wilson of Wilson Auto Detailing applies Armor Shield IX ceramic coting to the side of a customer's Tesla Model Y for a YouTube experimental video series. Photo Credit: Wilson Auto Detailing/YouTube
Luke Wilson of Wilson Auto Detailing applies Armor Shield IX ceramic coting to the side of a customer’s Tesla Model Y for a YouTube experimental video series. Photo Credit: Wilson Auto Detailing/YouTube

Before you can even begin the ceramic coating install process, the plastic you plan on protecting must be thoroughly cleaned, decontaminated, and if damaged in some way, repaired.

Here are the core steps for prepping plastic for a nano ceramic coating.

Wash

The first step in any ceramic coating prep process, is to thoroughly wash the area you plan on applying the product to with the right supplies.

To complete the ultimate two-bucket DIY car wash, we suggest starting with a ceramic coating prep car shampoo, and combining it with a high-quality microfiber chenille wash mitt.

Clay Decontamination

A clay mitt or clay towel works wonders on plastic materials, and unlike a traditional clay bar, it can be washed and reused if dropped on the ground. Claying will both remove any microscopic pieces of debris that may have embedded in the plastic, and will leave behind a much smoother surface.

For more on the art of claying cars, be sure to check out our blog article on decontaminating surfaces with clay media.

Paint Correction

If the plastic you plan on ceramic coating is painted, or is protected by a clear coat, paint correction procedures may need to be implemented. The level of repair required will vary greatly depending upon the condition of the paint and/or clear coat, so don’t hesitate to hand this task off to a pro if you don’t feel confident in your DIY capabilities.

You can learn more about the art of paint correction, here, where we go in-depth into what is required to restore damaged clear coat and paint on one’s own.

IPA Spray

The final step in the plastic surface prep phase, is to wipe the entire area down with an isopropyl alcohol (IPA) solution.

This will guarantee that you do not have any lingering debris sitting on the surface during the application of Armor Shield IX.

Ceramic Coating Plastic Installation Advice

As for the process of applying Armor Shield IX to plastic materials, you’ll find it to be about as straightforward as it gets. Just follow the instructions in the box, don’t get the stuff in your eyes, and if you feel like you need a break, crack open a cold brewskie before getting back to work.

The only issue people tend to have when ceramic coating plastic surfaces, is that it can be a tad difficult to determine when the coating has “flashed.” This is particularly true hen coating matte or unpainted black trim, as the iridescent sheen is not nearly as notable from certain angles.

Temperature

50°F (10°C)

60°F (15°C)

70°–80°F (20°–25°C)

Length of Time

4–5 minutes

2–3 minutes

1 minute

If you are having difficulty determining when you ceramic coating is flashing, you an always refer to the handy “suggested drying times chart” above. Remember, Armor Shield IX works best when applied in smaller sections, and should always be buffed away with one of AvalonKing’s plush microfiber towels after a few minutes of drying time.

Parting Shots

Once allowed to fully cure, ceramic coated plastics are protected and visually enhanced for years on end.
Once allowed to fully cure, ceramic coated plastics are protected and visually enhanced for years on end.

As you can imagine, everything from plastic headlights and hubcaps, to unpainted trim, bumpers, spoilers, grilles, and more can all be protected by Armor Shield IX if properly prepped and allowed time to cure.

Just remember, if the plastic bends easily, or feels rubbery to the touch, chances are it cannot be ceramic coated. These sorts of materials do best when coated with oil-rich protectants and rubber restoration products.

For everything else that’s plastic in nature, a healthy slathering of Armor Shield IX will provide the protection and shine it so desperately deserves. The open road is fraught with danger and disgusting debris, so you might as well err on the side of caution, and protect your vehicle’s plastics with the highest rated nano ceramic coating on the planet.

41 comments

Oliver Starkey

Oliver Starkey

Can your product be applied to the instrument cluster lens in the dashboard of a car?

Thanks.

Can your product be applied to the instrument cluster lens in the dashboard of a car?

Thanks.

John

John

Can this be used on gelcote, boats , etc .. ?

Can this be used on gelcote, boats , etc .. ?

Dale Pearl

Dale Pearl

48 hours curing time.

48 hours curing time.

Barry

Barry

How long is drying time,

How long is drying time,

Dale Pearl

Dale Pearl

Not something we’ve actually tested on but I would suspect that it would work!

Not something we’ve actually tested on but I would suspect that it would work!

Dale Pearl

Dale Pearl

Hello Jacques!
You’ll get the best results with a pass or two of polishing. follow that up with an IPA wipe to pick up any loose residues.

Hello Jacques!
You’ll get the best results with a pass or two of polishing. follow that up with an IPA wipe to pick up any loose residues.

Jacques

Jacques

Thanks for great content! I have a question though! When restoring headlights with wet sandpaper method..do I a) buff with a polish the apply your ceramic coating or b) not buff at all with polish and only apply the ceramic coating?

Thanks for great content! I have a question though! When restoring headlights with wet sandpaper method..do I a) buff with a polish the apply your ceramic coating or b) not buff at all with polish and only apply the ceramic coating?

Stewart

Stewart

Can the Armor Shield IX be applied to polarized Oakley sunglasses? I am waiting to apply it until I know it can be safely done.

Can the Armor Shield IX be applied to polarized Oakley sunglasses? I am waiting to apply it until I know it can be safely done.

Dale Pearl

Dale Pearl

Hello Stewart!
That isn’t anything we’ve tested ourselves but I don’t see any reason why it wouldn’t work unless there’s form of tint on the lens that is similar to automotive glass tint.

Hello Stewart!
That isn’t anything we’ve tested ourselves but I don’t see any reason why it wouldn’t work unless there’s form of tint on the lens that is similar to automotive glass tint.

Stewart

Stewart

Can the Armor Shield IX Nano Ceramic Coating be applied to polarized Oakley sunglasses? I have this ceramic coating and am waiting to apply them to my sunglasses until I know it is safe.

Can the Armor Shield IX Nano Ceramic Coating be applied to polarized Oakley sunglasses? I have this ceramic coating and am waiting to apply them to my sunglasses until I know it is safe.

Leave a comment

All comments are moderated before being published.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Subscribe to our newsletter

Promotions, new products and sales. Directly to your inbox.