Ceramic Booster Spray
Even the world’s highest rated consumer-grade nano ceramic coating needs a helping hand every now and then, which is precisely why AvalonKing created a Ceramic Coating SiO2 Boost Spray. Fortified with 20% silica dioxide (that’s double the SiO2 when compared to our competitors), this spray gives existing ceramic coatings the “boost” they need, and acts as a super glossy sacrificial outer layer. Engineered to provide protection for up to 6 months, and fully capable of serving as a stand-alone form of temporary protection, AvalonKing’s Ceramic coating SiO2 Boost Spray offers DIY enthusiasts the best of both worlds. Furthermore, this product is guaranteed to work with the rest of the AvalonKing lineup, including AvalonKing’s all-new shampoos and microfiber cloths!
- Tightens existing nano ceramic coatings by infusing porous areas with fresh SiO2 and booster additives, thus revitalizing the product’s bonding powers, increasing shine, and restoring hydrophobic water beading properties.
- Packs an industry-leading 20% silica dioxide (SiO2) content per bottle for unrivaled resilience.
- Offers up to 6 months of hydrophobic boosting capabilities and enhanced shine.
- Can be used in conjunction with Armor Shield IX ceramic coating, or by itself, as a temporary “quick fix” protectant, serving as a sacrificial layer for absorbing the impacts of water spots, tree sap, bug guts, bird droppings, etc…
- Applied atop a healthy coating of Armor Shield IX, fortifies the existing semi-permanent bonded ceramic coating layer, and adds additional heat resistance and UV protection.
- Engineered to play nice with AvalonKing’s exclusive ph-neutral maintenance shampoo of utter awesomeness and entire microfiber line.
- Features sensuous notes of vanilla and privilege.
- Meant for external use only, so do not use it as a chaser while taking tequila shots.
- Available exclusively in a 16oz. no-drip spray bottle for convenience and value.
- Sports a 1–year unopened package shelf-life.
- Wash your ride with one of AvalonKing’s Car Shampoo products, using the two-bucket car washing technique.
- Spritz surfaces with AvalonKing’s proprietary blend of IPA Prep Spray to remove any residue that may still be stuck on the surface, followed by a wipe-down with one of our ultra-plush microfiber cloths.
- Apply Ceramic Coating SiO2 Boost Spray to the dry surface, while avoiding direct sunlight, just like your creepy neighbor who only comes out at night…
- Spray the coating section by section, smoothing the liquid out as you go with a fresh microfiber cloth as per instructed in a crosshatch pattern.
- After 10–15 seconds the coating’s flashing should become visible, at which point it will need to be buffed away.
- Give your ceramic coating booster enough time to cure, well away from water or wet weather for 24hrs+, while avoiding car shampoo and other detailing chemicals for at least 3–5 days.
- Wait at least a minimum of 24 hours between coats.
- Reapply every 2–3 months for maximum overlapping levels of protection (you’ll know it’s time when liquid beading and sheeting effects begin to fade).
Customer Reviews
I will agree with some of the reviews that this product can be difficult to wipe off, but I have experimented and found that a small amount of product (2 - 3 sprays per panel) on a plush microfiber towel works incredibly well and requires much less effort to remove. Using the included application microfiber application pad is most definitely NOT the way to apply this ceramic booster spray!
I got the booster when it first came out and finally had the chance to use it.
The good- the booster really helps the ceramic coating, it restored the shine and leaves the surface really slick and smooth to the touch after buffing it off. It’s also nice that the booster last 6 months.
The bad- buffing the coating off can take a bit like other people mentioned, I have a black car and I went in horizontal and diagonal ways and even went in circles, doing that way seemed to do the trick. I only used 2 microfiber towels though.
I thought I was the only one !!!!! I tried the booster spray and I too saw that it left a haze that was hard as heck to get rid of. It was 100x more work to get the booster spray off than putting the coating on. I had to recoat my car to make sure I got rid of all the haze. I feel like I fell for a scam. Guys you have to go back to R and D, this ain't it.
I used AS9 a few weeks ago and product was fantastic to work with. The booster spray is somewhat more difficult product to remove than similar products previously used. This is definitely a product where less is more. I used supplied applicator pad and sprayed a couple lines on pad for half door panel dice area. Applying too much product is going to be very difficult to remove without smearing or smudging. Once completed, vehicle had excellent gloss and slickness. So overall, objective met.
Bought this as I was losing the beading action on the hood of my truck. it was very difficult to buff off the residue on the initial application. It took another wash and dry to do that, and was still a little troublesome.
