How to wax a Subaru Ascent?

How to wax a Subaru Ascent?

Learn the step-by-step process of waxing a Subaru Ascent to keep its exterior looking sleek and protected.
How to wax a Subaru Outback? Reading How to wax a Subaru Ascent? 5 minutes Next How to wax a Subaru Impreza?

How to wax a Subaru Ascent?

Waxing your Subaru Ascent is not just about maintaining its shiny and sleek appearance. It's also about protecting the paintwork from the harsh elements. Whether you're an experienced car enthusiast or a newbie, this guide will walk you through the process of waxing your Subaru Ascent, ensuring it stays in top-notch condition for years to come.

Understanding the Importance of Waxing

Before we delve into the how-to, it's crucial to understand why waxing your Subaru Ascent is important. Wax serves as a protective layer for your car's paint. It shields the paint from harmful ultraviolet rays, road grime, bird droppings, and other environmental factors that can cause fading or damage.

Additionally, a good wax job enhances the aesthetic appeal of your vehicle. It gives your car a glossy finish that not only turns heads but also boosts your vehicle's resale value. So, waxing is not just about vanity; it's a practical way to maintain your Subaru Ascent's value and longevity.

Choosing the Right Wax

With a plethora of car waxes available in the market, choosing the right one for your Subaru Ascent can be a daunting task. However, understanding the different types of car waxes can make the selection process easier.

Car waxes come in three main types: paste, liquid, and spray. Paste waxes are great for a high-gloss finish but can be challenging to apply evenly. Liquid waxes are easier to apply and provide long-lasting protection, while spray waxes are best for quick touch-ups.

When selecting a wax, consider factors such as your car's color, the climate in your area, and your skill level. Some waxes are specifically formulated for dark or light-colored cars, while others offer extra protection against harsh weather conditions.

Preparing Your Subaru Ascent for Waxing

Proper preparation is key to achieving a flawless wax job. Start by washing your Subaru Ascent thoroughly. Use a high-quality car wash soap to remove dirt and grime from the surface. Avoid using dish soap or other harsh detergents as they can strip off the existing wax and damage the paintwork.

After washing, dry your car completely. Any water droplets left on the surface can cause streaks during the waxing process. Use a microfiber towel to dry your car as it's gentle on the paint and highly absorbent.

Once your car is clean and dry, inspect the paint for any scratches or swirl marks. If present, use a scratch remover or a swirl remover to fix these imperfections before waxing. This step ensures a smooth and shiny finish after waxing.

Waxing Your Subaru Ascent

Applying the Wax

Now that your Subaru Ascent is clean and prepped, it's time to apply the wax. If you're using a paste or liquid wax, apply a small amount of wax to a foam applicator pad. Spread the wax onto one section of the car at a time, using small circular motions. Avoid applying wax on plastic or rubber parts as it can leave white residue.

For spray waxes, spray the wax onto the car's surface and spread it with a microfiber towel. Remember, less is more when it comes to waxing. Applying too much wax won't give you a shinier finish; instead, it will make buffing more difficult.

Buffing the Wax

After applying the wax, let it dry until it forms a hazy finish. This usually takes about 5 to 10 minutes, depending on the type of wax and the weather conditions. Once the wax is dry, it's time to buff it off.

Use a clean, dry microfiber towel to buff the wax. Turn the towel frequently to avoid wax build-up. Buff in a circular motion until all the haze is gone and a shiny finish is revealed. Repeat the process until you've waxed and buffed the entire car.

Maintaining the Wax Finish

Waxing your Subaru Ascent is not a one-time task. To keep your car looking its best, you need to maintain the wax finish. This involves washing your car regularly with a wax-safe car wash soap and reapplying wax as needed.

Generally, you should wax your car every three to four months. However, this can vary depending on the type of wax you use and the conditions your car is exposed to. For instance, if your car is often parked outdoors, you might need to wax more frequently.

Remember, maintaining a regular waxing routine not only keeps your Subaru Ascent looking shiny and new, but it also protects the paintwork, ensuring your vehicle retains its value and appeal for years to come.

Ready to give your Subaru Ascent the protection and shine it deserves? Look no further than AvalonKing for all your car waxing needs. With years of experience in providing top-quality car cleaning products, AvalonKing has everything you need to keep your vehicle looking pristine. From ceramic coatings to car shampoos, our products are designed to offer the best care for your car. Check out our products today and take the first step towards a dazzling finish for your Subaru Ascent.

Subscribe to our newsletter

Promotions, new products and sales. Directly to your inbox.