How to wax a Subaru BRZ?

How to wax a Subaru BRZ?

Learn the step-by-step process of waxing a Subaru BRZ to achieve a glossy, showroom-worthy finish.
How to wax a Subaru WRX? Reading How to wax a Subaru BRZ? 6 minutes Next How to wax a Subaru Crosstrek?

How to wax a Subaru BRZ?

Waxing your Subaru BRZ is not just about maintaining its shiny, new-car look. It's also about preserving the paintwork and ensuring that your vehicle continues to look its best for years to come. But how do you go about it? What are the steps involved? And what are the best products to use? In this comprehensive guide, we'll walk you through the process, step by step, and provide you with all the information you need to wax your Subaru BRZ like a pro.

Understanding the Importance of Waxing

Before we dive into the how-to, let's first understand why waxing your Subaru BRZ is important. Waxing your car isn't just about aesthetics. It's also about protection. The wax layer acts as a barrier between your car's paint and the harsh elements of the environment, such as UV rays, rain, and road salt, which can cause fading, discoloration, and rust.

Moreover, waxing your car can also help to hide minor scratches and swirl marks, giving your car a smooth, glossy finish. It also makes cleaning your car easier, as dirt and grime are less likely to stick to the waxed surface.

Choosing the Right Wax

There are many different types of car wax on the market, and choosing the right one for your Subaru BRZ can be a bit overwhelming. The most common types are paste wax, liquid wax, and spray wax.

Paste wax is the traditional choice and often provides the longest-lasting protection and shine. However, it can be a bit more difficult to apply evenly. Liquid wax is easier to apply and can provide a similar level of protection and shine, but it may not last as long. Spray wax is the easiest to apply and is great for quick touch-ups, but it usually doesn't provide as much protection or last as long as the other types.

When choosing a wax, you'll also want to consider the color of your car. Some waxes are formulated specifically for dark or light-colored cars and can help to enhance the color and shine.

Preparing Your Car for Waxing

Before you start waxing your Subaru BRZ, you'll need to prepare the car's surface. This involves washing and drying the car thoroughly to remove any dirt, grime, or other contaminants that could scratch the paint during the waxing process.

It's best to wash your car in a shaded area to prevent the soap and water from drying too quickly and leaving spots. Use a car wash soap, not dish soap or other household cleaners, which can strip away the existing wax and damage the paint. Rinse the car thoroughly and then dry it using a microfiber towel or a car drying towel to avoid leaving water spots.

Applying the Wax

Now that your car is clean and dry, it's time to apply the wax. Start by applying a small amount of wax to a foam applicator pad or a microfiber towel. Then, using a circular motion, apply the wax to a small section of the car at a time.

It's important to apply the wax evenly and to avoid getting it on non-painted surfaces, such as plastic trim or rubber seals, as it can leave white residue. If you do get wax on these areas, wipe it off immediately.

Once you've applied the wax, let it dry until it turns to a hazy white color. This usually takes about 5 to 10 minutes, but it can vary depending on the type of wax and the temperature and humidity.

Buffing the Wax

After the wax has dried, it's time to buff it off. Using a clean, dry microfiber towel, gently buff the wax off using a circular motion. Be sure to turn the towel frequently to avoid reapplying the wax.

Buffing the wax off can be a bit of a workout, but it's worth it for the shine and protection it provides. Plus, it's a great way to get to know every inch of your Subaru BRZ.

Once you've buffed off all the wax, give your car a final once-over to make sure you didn't miss any spots. If you find any areas where the wax hasn't been fully buffed off, simply go over them again with the microfiber towel.

Maintaining the Wax

Now that your Subaru BRZ is waxed and looking its best, you'll want to maintain that shine and protection for as long as possible. This means washing your car regularly to remove dirt and grime that can dull the shine and degrade the wax.

It's also a good idea to reapply the wax every three to six months, depending on how often you drive your car and the conditions it's exposed to. If you notice that water is no longer beading up on the surface of your car, it's a sign that it's time to reapply the wax.

Conclusion

Waxing your Subaru BRZ is a simple and effective way to keep it looking its best and to protect it from the elements. With the right products and a little bit of elbow grease, you can achieve a professional-quality wax job at home.

Section Image

So, why not give it a try? Your Subaru BRZ will thank you for it.

Ready to take your Subaru BRZ's shine to the next level? Check out our products at AvalonKing, where we offer a premium selection of car cleaning essentials, including ceramic coatings and car shampoos. With years of expertise in providing top-quality vehicle care solutions, AvalonKing has everything you need to keep your BRZ looking immaculate. Visit us online and discover how our products can enhance your waxing routine and protect your car's aesthetic appeal.

Subscribe to our newsletter

Promotions, new products and sales. Directly to your inbox.