How to wax a Tesla Model 3?

How to wax a Tesla Model 3?

Learn the step-by-step process of waxing a Tesla Model 3 to help protect its sleek exterior and maintain that showroom shine.
How to wash a Porsche Cayenne? Reading How to wax a Tesla Model 3? 6 minutes Next How to wax a Tesla Model S?

How to wax a Tesla Model 3?

Waxing your Tesla Model 3 is not just about maintaining its sleek, shiny appearance. It's also about protecting the paintwork from the elements, enhancing the car's aerodynamics, and even improving its resale value. But how do you go about it? What are the best techniques and products to use? Let's dive in and find out.

Understanding the Importance of Waxing

Before we delve into the process, it's crucial to understand why waxing your Tesla Model 3 is so important. Many people think it's just about aesthetics, but there's much more to it than that.

Firstly, waxing provides a protective layer over the paintwork. This helps to shield it from the damaging effects of the sun's UV rays, as well as from dirt, bird droppings, tree sap, and other environmental pollutants. Without this protection, the paint can fade, crack, or peel over time.

Secondly, a good wax job can enhance your car's aerodynamics. By creating a smooth, slick surface, it reduces air resistance, which can help to improve fuel efficiency. And finally, a well-maintained car is likely to have a higher resale value, so regular waxing can be a good investment for the future.

Choosing the Right Wax

There are many different types of car wax on the market, so choosing the right one for your Tesla Model 3 can be a bit of a minefield. To help you navigate, here are some key factors to consider.


Car waxes can be made from natural waxes, synthetic polymers, or a combination of both. Natural waxes, such as carnauba, tend to give a deep, rich shine, but they don't last as long as synthetic waxes. Synthetic waxes, on the other hand, are more durable and easier to apply, but they may not give the same depth of shine.

There's also the option of ceramic coatings, which are a relatively new innovation in the car care industry. These provide a hard, durable layer of protection that can last for years, rather than months. However, they are more expensive and require a professional to apply.


Car waxes come in several formats, including paste, liquid, and spray. Paste waxes generally offer the best protection and shine, but they can be hard to apply and remove. Liquid waxes are easier to use, but they may not last as long. Spray waxes are the easiest to apply, but they offer the least protection and shine.

Ultimately, the best wax for your Tesla Model 3 will depend on your specific needs, budget, and how much time you're willing to invest in the process.

Preparing Your Car for Waxing

Before you start waxing, it's important to properly prepare your car. This involves washing it thoroughly to remove any dirt or contaminants that could scratch the paintwork during the waxing process.

Start by rinsing the car with a hose to remove loose dirt. Then, using a soft, clean sponge and a bucket of warm, soapy water, wash the car from top to bottom. Make sure to rinse the sponge regularly to prevent dirt from building up and causing scratches.

Once the car is clean, dry it thoroughly using a microfiber towel. This will prevent water spots from forming, which can interfere with the waxing process.

The Waxing Process

Now that your car is clean and dry, it's time to start waxing. Here's a step-by-step guide to help you get the best results.

  1. Apply a small amount of wax to a foam applicator pad.
  2. Using a circular motion, spread the wax evenly over a small section of the car's surface.
  3. Allow the wax to dry until it forms a hazy film. This usually takes about 5-10 minutes, depending on the temperature and humidity.
  4. Using a clean, dry microfiber towel, buff the wax off using a circular motion. Make sure to turn the towel regularly to avoid build-up of wax.
  5. Repeat this process until you've waxed the entire car.

Remember, less is more when it comes to car wax. Applying too much can make it difficult to remove and won't provide any extra protection or shine.

Maintaining the Shine

Once you've waxed your Tesla Model 3, you'll want to keep it looking its best for as long as possible. Here are some tips to help you do that.

Section Image
  • Avoid washing your car for at least 24 hours after waxing. This allows the wax to fully cure and bond to the paintwork.
  • When you do wash your car, use a pH-neutral car shampoo. This won't strip the wax like harsh, alkaline detergents can.
  • Try to park your car in the shade whenever possible. Prolonged exposure to the sun can degrade the wax and cause the paintwork to fade.
  • Consider using a quick detailer spray between waxing sessions. This can help to maintain the shine and extend the life of the wax.

With regular care and maintenance, your Tesla Model 3 can stay looking shiny and new for many years to come. So why not give waxing a go? It's a small investment of time and effort that can pay big dividends in the long run.

Ready to elevate your Tesla Model 3's shine to the next level? Look no further than AvalonKing for all your car care needs. With years of expertise in providing top-quality cleaning products, you can trust AvalonKing to help protect and maintain your vehicle's lustrous appearance. From ceramic coatings to car shampoos, we have everything you need to keep your Tesla looking pristine. Check out our products today and give your Model 3 the treatment it deserves.

Subscribe to our newsletter

Promotions, new products and sales. Directly to your inbox.