Armor Shield IX DIY Kit

• 1 x 30ml bottle of the world’s best DIY ceramic coating.
• 1 x applicator block with comfort hold slots.
• 3 x microfiber applicator suedes.
• 1 x pair of nitrile protective gloves *snap*.
• 1 x ultra-plush microfiber buffing towel.
• 1 x clear and easy-to-follow set of instructions.
• 1 x awesome car sticker to make your friends jealous. Yeah, suck-it-sideways, Steve!
• Contrary to internet rumors, ARMOR SHIELD IX does not make you “younger, fitter, and better looking.” But buying it does prove that you are smarter.

Preparation is key, make sure you invest the time prepping the surface for optimum results.

• Wash your car till it’s shining like a new button using AvalonKing’s Ceramic Prep Shampoo.
• Rub down with an IPA solution to remove any residue from old chemicals, soaps, or sealants.
• Apply coating as per instructions in a crosshatch pattern, section by section, buffing off as you go. Yes, it’s that easy!
• Leave to cure away from water or wet weather for 48hrs+, avoid washing with soap or using other chemicals for 5-7 days.

Preparation is key, make sure you invest the time prepping the surface for optimum results.

• Wash your car till it’s shining like a rapper’s wristwatch using AvalonKing’s Ceramic Prep Shampoo.
• Using a light lather slick the surface of the car and use a high quality claybar or claymitt to remove any residue from the surface.
• Polish the surfaces with a high-quality polish and buffing towel or electric buffer.
• Rub down with an IPA solution to remove any residue from old chemicals, soaps, or sealants.
• Apply coating as per instructions in a crosshatch pattern, section by section, buffing off as you go. Yep, it is really that easy!
• Leave to cure away from water or wet weather for 48hrs+, avoid washing with soap or using other chemicals for 5-7 days.